L4Re Operating System Framework
Interface and Usage Documentation
Loading...
Searching...
No Matches
perform.h
Go to the documentation of this file.
1
7/*
8 * (c) 2008-2009 Adam Lackorzynski <adam@os.inf.tu-dresden.de>,
9 * Frank Mehnert <fm3@os.inf.tu-dresden.de>,
10 * Lars Reuther <reuther@os.inf.tu-dresden.de>
11 * economic rights: Technische Universität Dresden (Germany)
12 * This file is part of TUD:OS and distributed under the terms of the
13 * GNU Lesser General Public License 2.1.
14 * Please see the COPYING-LGPL-2.1 file for details.
15 */
16
17#ifndef __L4UTIL_PERFORM_H
18#define __L4UTIL_PERFORM_H
19
20#include <l4/sys/types.h>
21#include <l4/sys/compiler.h>
22
24
25extern const char*strp6pmc_event(l4_uint32_t event);
26
27#ifndef CONFIG_PERFORM_ONLY_PROTOTYPES
28
29#if ! (defined CPU_PENTIUM ^ defined CPU_P6 ^ defined CPU_K7)
30
31#error You must define your target architecture.
32#error Define EITHER CPU_PENTIUM for Intel Pentium or CPU_P6 for Intel PPro/PII/PIII.
33
34#else
35
36/* P5/P6/K7 section */
37
38/* Makros for access to model specific registers (MSR) */
39
40/* Write the 64-Bit Model Specific Register. First argument is the register,
41 second the 64-Bit value. This can only be called at priviledge level 0.
42 With L4, the kernel emulates the WRMSR when calling in PL 3.
43 */
44static inline void l4_i586_wrmsr(unsigned reg,unsigned long long*val){
45 unsigned long dummyeax, dummyecx, dummyedx;
46
47 asm volatile(
48 ".byte 0xf; .byte 0x30\n" /* wrmsr */
49 : "=a" (dummyeax), "=d" (dummyedx), "=c" (dummyecx)
50 : "2" (reg), "0" (*(unsigned *)val), "1" (*((unsigned *)val+1))
51 );
52}
53
54/* Read the 64-Bit Model Specific Register. First argument is the register,
55 second the address to a 64-Bit value. This can only be called at
56 priviledge level 0. With L4, the kernel emulates the RDMSR when calling
57 in PL 3.
58 */
59static inline void l4_i586_rdmsr(unsigned reg,unsigned long long*val){
60 unsigned dummy;
61
62 asm volatile(
63 ".byte 0xf; .byte 0x32\n" /* rdmsr */
64 : "=a" (*(unsigned *)val), "=d" (*((unsigned *)val+1)), "=c" (dummy)
65 : "2" (reg)
66 );
67}
68
69
70#ifdef CPU_PENTIUM
71/* Pentium section */
72
73/* functions and events defined here are only usable at Pentium
74 Processors. P6 architecture does NOT support this kind of measuring and
75 these events. P6 architecture has its own counters and its own events.
76 See P6-section for details. */
77
78/* from l4linux/arch/l4-i386/include/perform.h */
79
80static inline void
81l4_i586_reset_event_counter(void){
82 asm volatile("xor %%eax, %%eax\n"
83 "xor %%edx, %%edx\n"
84 "movl $0x12, %%ecx\n"
85 ".byte 0x0f, 0x30\n"
86 "movl $0x13, %%ecx\n"
87 ".byte 0x0f, 0x30\n"
88 : : : "cx", "ax", "dx"
89 );
90};
91
92static inline void
93l4_i586_read_event_counter_long(long long *counter0, long long *counter1)
94{
95 asm volatile(
96 /* "movl $0, %%eax\n"
97 "movl $0x11, %%ecx\n"
98 ".byte 0x0f, 0x30\n" *//* stop event counting */
99 "movl $0x12, %%ecx\n"
100 ".byte 0x0f, 0x32\n"
101 "movl %%eax, (%%ebx)\n"
102 "movl %%edx, 4(%%ebx)\n"
103 "movl $0x13, %%ecx\n"
104 ".byte 0x0f, 0x32\n"
105 "movl %%eax, (%%esi)\n"
106 "movl %%edx, 4(%%esi)\n"
107 : /* no output */
108 : "b" (counter0), "S" (counter1)
109 : "ax", "cx", "dx"
110 );
111}
112
113static inline void
114l4_i586_read_event_counter(int *counter0, int *counter1)
115{
116 asm volatile("pushl %%edx\n"
117 ".byte 0x0f, 0x30\n"
118 "movl $0x12, %%ecx\n"
119 ".byte 0x0f, 0x32\n"
120 "movl %%eax, %%ebx\n"
121 "movl $0x13, %%ecx\n"
122 ".byte 0x0f, 0x32\n"
123 "popl %%edx\n"
124 : "=b" (*counter0), "=a" (*counter1)
125 : "1" (0), "c" (0x11)
126 );
127}
128
129static inline void
130l4_i586_select_event(int event0, int event1)
131{
132 asm volatile(".byte 0x0f, 0x30\n"
133 :
134 :
135 "a" (event0 + (event1 << 16)),
136 "d" (0),
137 "c" (0x11)
138 );
139};
140
141#define P5_RD_MISS 0x003 /* 000011B */
142#define P5_WR_MISS 0x008 /* 000100B */
143#define P5_RW_MISS 0x029 /* 101001B */
144#define P5_EX_MISS 0x00e /* 001110B */
145
146#define P5_D_WBACK 0x006 /* 000110B */
147
148#define P5_RW_TLB 0x002 /* 00010B */
149#define P5_EX_TLB 0x00d /* 01101B */
150
151#define P5_A_STALL 0x01f /* 11111B */
152#define P5_W_STALL 0x019 /* 11001B */
153#define P5_R_STALL 0x01a /* 11010B */
154#define P5_X_STALL 0x01b /* 11011B */
155
156#define P5_AGI_STALL 0x01f /* 11111B */
157
158#define P5_PIPLINE_FLUSH 0x015 /* 10101B */
159
160#define P5_NON_CACHE_RD 0x01e /* 11110B */
161#define P5_NCACHE_REFS 0x01e /* 11110B */
162#define P5_LOCKED_BUS 0x01c /* 11100B */
163
164#define P5_MEM2PIPE 0x009 /* 01001B */
165#define P5_BANK_CONF 0x00a /* 01010B */
166
167
168#define P5_INSTRS_EX 0x016 /* 10110B */
169#define P5_INSTRS_EX_V 0x017 /* 10111B */
170
171
172#define P5_CNT_NOTHING (0x00 << 6) /* 00B << 6 */
173#define P5_CNT_EVENT_PL0 (0x01 << 6) /* 01B << 6 */
174#define P5_CNT_EVENT_PL3 (0x02 << 6) /* 10B << 6 */
175#define P5_CNT_EVENT (0x03 << 6) /* 11B << 6 */
176#define P5_CNT_CLOCKS_PL0 (0x05 << 6) /* 101B << 6 */
177#define P5_CNT_CLOCKS_PL3 (0x06 << 6) /* 110B << 6 */
178#define P5_CNT_CLOCKS (0x07 << 6) /* 111B << 6 */
179
180
181#else
182#if defined CPU_P6
183/* PPro/PII/PIII section */
184
185/*-
186 * Copyright (c) 1997 The President and Fellows of Harvard College.
187 * All rights reserved.
188 * Copyright (c) 1997 Aaron B. Brown.
189 *
190 * Redistribution and use in source and binary forms, with or without
191 * modification, are permitted provided that the following conditions
192 * are met:
193 * 1. Redistributions of source code must retain the above copyright
194 * notice, this list of conditions and the following disclaimer.
195 * 2. Redistributions in binary form must reproduce the above copyright
196 * notice, this list of conditions and the following disclaimer in the
197 * documentation and/or other materials provided with the distribution.
198 * 3. All advertising materials mentioning features or use of this software
199 * must display the following acknowledgement:
200 * This product includes software developed by Harvard University
201 * and its contributors.
202 * 4. Neither the name of the University nor the names of its contributors
203 * may be used to endorse or promote products derived from this software
204 * without specific prior written permission.
205 *
206 * THIS SOFTWARE IS PROVIDED BY HARVARD AND CONTRIBUTORS ``AS IS'' AND
207 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
208 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
209 * ARE DISCLAIMED. IN NO EVENT SHALL HARVARD UNIVERSITY OR CONTRIBUTORS BE
210 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
211 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
212 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
213 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
214 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
215 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
216 * POSSIBILITY OF SUCH DAMAGE.
217 */
218
219/*********************************************************************
220 ** Symbolic names for counter numbers (used in select_p6counter()) **
221 *********************************************************************
222 *
223 * These correspond in order to the Pentium Pro counters. Add new counters at
224 * the end. These agree with the mneumonics in the Pentium Pro Family
225 * Developer's Manual, vol 3.
226 *
227 * Those events marked with a $ require a MESI unit field; those marked with
228 * a @ require a self/any unit field. Those marked with a 0 are only supported
229 * in counter 0; those marked with 1 are only supported in counter 1.
230 */
231
232/* Data cache unit */
233#define P6_DATA_MEM_REFS 0x43 /* total memory refs */
234#define P6_DCU_LINES_IN 0x45 /* all lines allocated in cache unit */
235#define P6_DCU_M_LINES_IN 0x46 /* M lines allocated in cache unit */
236#define P6_DCU_M_LINES_OUT 0x47 /* M lines evicted from cache */
237#define P6_DCU_MISS_OUTSTANDING 0x48 /* #cycles a miss is outstanding */
238
239/* Instruction fetch unit */
240#define P6_IFU_IFETCH 0x80 /* instruction fetches */
241#define P6_IFU_IFETCH_MISS 0x81 /* instruction fetch misses */
242#define P6_ITLB_MISS 0x85 /* ITLB misses */
243#define P6_IFU_MEM_STALL 0x86 /* number of cycles IFU is stalled */
244#define P6_ILD_STALL 0x87 /* #stalls in instr length decode */
245
246/* L2 Cache */
247#define P6_L2_IFETCH 0x28 /* ($) l2 ifetches */
248#define P6_L2_LD 0x29 /* ($) l2 data loads */
249#define P6_L2_ST 0x2a /* ($) l2 data stores */
250#define P6_L2_LINES_IN 0x24 /* lines allocated in l2 */
251#define P6_L2_LINES_OUT 0x26 /* lines removed from l2 */
252#define P6_L2_M_LINES_INM 0x25 /* modified lines allocated in L2 */
253#define P6_L2_M_LINES_OUTM 0x27 /* modified lines removed from L2 */
254#define P6_L2_RQSTS 0x2e /* ($) number of l2 requests */
255#define P6_L2_ADS 0x21 /* number of l2 addr strobes */
256#define P6_L2_DBUS_BUSY 0x22 /* number of data bus busy cycles */
257#define P6_L2_DBUS_BUSY_RD 0x23 /* #bus cycles xferring l2->cpu */
258
259/* External bus logic */
260#define P6_BUS_DRDY_CLOCKS 0x62 /* (@) #clocks DRDY is asserted */
261#define P6_BUS_LOCK_CLOCKS 0x63 /* (@) #clocks LOCK is asserted */
262#define P6_BUS_REQ_OUTSTANDING 0x60 /* #bus requests outstanding */
263#define P6_BUS_TRAN_BRD 0x65 /* (@) bus burst read txns */
264#define P6_BUS_TRAN_RFO 0x66 /* (@) bus read for ownership txns */
265#define P6_BUS_TRAN_WB 0x67 /* (@) bus writeback txns */
266#define P6_BUS_TRAN_IFETCH 0x68 /* (@) bus instr fetch txns */
267#define P6_BUS_TRAN_INVAL 0x69 /* (@) bus invalidate txns */
268#define P6_BUS_TRAN_PWR 0x6a /* (@) bus partial write txns */
269#define P6_BUS_TRANS_P 0x6b /* (@) bus partial txns */
270#define P6_BUS_TRANS_IO 0x6c /* (@) bus I/O txns */
271#define P6_BUS_TRAN_DEF 0x6d /* (@) bus deferred txns */
272#define P6_BUS_TRAN_BURST 0x6e /* (@) bus burst txns */
273#define P6_BUS_TRAN_ANY 0x70 /* (@) total bus txns */
274#define P6_BUS_TRAN_MEM 0x6f /* (@) total memory txns */
275#define P6_BUS_DATA_RCV 0x64 /* #busclocks CPU is receiving data */
276#define P6_BUS_BNR_DRV 0x61 /* #busclocks CPU is driving BNR pin */
277#define P6_BUS_HIT_DRV 0x7a /* #busclocks CPU is driving HIT pin */
278#define P6_BUS_HITM_DRV 0x7b /* #busclocks CPU is driving HITM pin*/
279#define P6_BUS_SNOOP_STALL 0x7e /* #clkcycles bus is snoop-stalled */
280
281/* FPU */
282#define P6_FLOPS 0xc1 /* (0) number of FP ops retired */
283#define P6_FP_COMP_OPS 0x10 /* (0) computational FPOPS exec'd */
284#define P6_FP_ASSIST 0x11 /* (1) FP excep's handled in ucode */
285#define P6_MUL 0x12 /* (1) number of FP multiplies */
286#define P6_DIV 0x13 /* (1) number of FP divides */
287#define P6_CYCLES_DIV_BUSY 0x14 /* (0) number of cycles divider busy */
288
289/* Memory ordering */
290#define P6_LD_BLOCKS 0x03 /* number of store buffer blocks */
291#define P6_SB_DRAINS 0x04 /* # of store buffer drain cycles */
292#define P6_MISALING_MEM_REF 0x05 /* # misaligned data memory refs */
293
294/* Instruction decoding and retirement */
295#define P6_INST_RETIRED 0xc0 /* number of instrs retired */
296#define P6_UOPS_RETIRED 0xc2 /* number of micro-ops retired */
297#define P6_INST_DECODER 0xd0 /* number of instructions decoded */
298
299/* Interrupts */
300#define P6_HW_INT_RX 0xc8 /* number of hardware interrupts */
301#define P6_CYCLES_INT_MASKED 0xc6 /* number of cycles hardints masked */
302#define P6_CYCLES_INT_PENDING_AND_MASKED 0xc7 /* #cycles masked but pending */
303
304/* Branches */
305#define P6_BR_INST_RETIRED 0xc4 /* number of branch instrs retired */
306#define P6_BR_MISS_PRED_RETIRED 0xc5 /* number of mispred'd brs retired */
307#define P6_BR_TAKEN_RETIRED 0xc9 /* number of taken branches retired */
308#define P6_BR_MISS_PRED_TAKEN_RET 0xca /* #taken mispredictions br's retired*/
309#define P6_BR_INST_DECODED 0xe0 /* number of branch instrs decoded */
310#define P6_BTB_MISSES 0xe2 /* # of branches that missed in BTB */
311#define P6_BR_BOGUS 0xe4 /* number of bogus branches */
312#define P6_BACLEARS 0xe6 /* # times BACLEAR is asserted */
313
314/* Stalls */
315#define P6_RESOURCE_STALLS 0xa2 /* # resource-related stall cycles */
316#define P6_PARTIAL_RAT_STALLS 0xd2 /* # cycles/events for partial stalls*/
317
318/* Segment register loads */
319#define P6_SEGMENT_REG_LOADS 0x06 /* number of segment register loads */
320
321/* Clocks */
322#define P6_CPU_CLK_UNHALTED 0x79 /* #clocks CPU is not halted */
323
324/* Unit field tags */
325#define P6_UNIT_M 0x0800
326#define P6_UNIT_E 0x0400
327#define P6_UNIT_S 0x0200
328#define P6_UNIT_I 0x0100
329#define P6_UNIT_MESI 0x0f00
330
331#define P6_UNIT_SELF 0x0000
332#define P6_UNIT_ANY 0x2000
333
334/****************************************************************************
335 ** Flag bit definitions (used for the 'flag' field in select_p6counter()) **
336 ****************************************************************************
337 *
338 * The driver accepts fully-formed counter specifications from user-level.
339 * The following flags are mneumonics for the bits that get set in the
340 * PerfEvtSel0 and PerfEvtSel1 MSR's
341 *
342 */
343#define P6CNT_U 0x010000 /* Monitor user-level events */
344#define P6CNT_K 0x020000 /* Monitor kernel-level events */
345#define P6CNT_E 0x040000 /* Edge detect: count state transitions */
346#define P6CNT_PC 0x080000 /* Pin control: ?? */
347#define P6CNT_IE 0x100000 /* Int enable: enable interrupt on overflow */
348#define P6CNT_F 0x200000 /* Freeze counter (handled in software) */
349#define P6CNT_EN 0x400000 /* enable counters (in PerfEvtSel0) */
350#define P6CNT_IV 0x800000 /* Invert counter mask comparison result */
351
352/*****************************
353 ** Miscellaneous constants **
354 *****************************
355 *
356 * Number of Pentium Pro programable hardware counters.
357 */
358#define NUM_P6HWC 2
359
360/*****************************************************************************
361*
362* End of Copyright by Harvard College
363*
364*****************************************************************************/
365
366
367#define MSR_P6_EVNTSEL0 0x186
368#define MSR_P6_EVNTSEL1 0x187
369#define MSR_P6_PERFCTR0 0xc1
370#define MSR_P6_PERFCTR1 0xc2
371
372/* P6-specific Makros to manipulate and read counters */
373
374/* Read the 40 bit performance monitoring counter. This requires
375 the PCE-flag in CR4 to be set. Otherwise GP0 is raised. Works only
376 at P6.
377 */
378#define l4_i686_rdpmc(cntr, res_p) \
379 __asm __volatile( \
380 "movl %2, %%ecx # put counter number in \n\
381 .byte 0xf; .byte 0x33 # RDPMC instruction \n\
382 movl %%edx, %1 # High order 32 bits \n\
383 movl %%eax, %0 # Low order 32 bits" \
384 : "=g" (*(int *)(res_p)), "=g" (*(((int *)res_p)+1)) \
385 : "g" (cntr) \
386 : "ecx", "eax", "edx")
387
388static inline l4_uint32_t l4_i686_rdpmc_32(int cntr){
389 l4_uint32_t x;
390
391 __asm__ __volatile__(
392 ".byte 0xf; .byte 0x33 # RDPMC instruction"
393 : "=a" (x)
394 : "c" (cntr)
395 : "ecx", "eax", "edx");
396 return x;
397}
398
399static inline void l4_i686_select_perfctr_event(int counter,
400 unsigned long long val){
401 l4_i586_wrmsr(MSR_P6_EVNTSEL0+counter, &val);
402}
403
404static inline void l4_i686_select_perfctr0_event(long long *val){
405 asm volatile(
406 "movl $MSR_P6_EVNTSEL0, %%ecx\n"
407 "movl (%%ebx), %%eax\n"
408 "movl 4(%%ebx), %%edx\n"
409 //".byte 0xcc, 0xeb, 0x01, 0x21\n"
410 ".byte 0x0f, 0x30\n" // wrmsr
411 //".byte 0xcc, 0xeb, 0x01, 0x21\n"
412 : /* no output */
413 : "b" (val)
414 : "ax", "cx", "dx", "bx"
415 );
416
417}
418
419/* end of P6 section */
420#else
421
422#define K7CNT_U 0x010000 /* Monitor user-level events */
423#define K7CNT_K 0x020000 /* Monitor kernel-level events */
424#define K7CNT_E 0x040000 /* Edge detect: count state transitions */
425#define K7CNT_PC 0x080000 /* Pin control: ?? */
426#define K7CNT_IE 0x100000 /* Int enable: enable interrupt on overflow */
427#define K7CNT_F 0x200000 /* Freeze counter (handled in software) */
428#define K7CNT_EN 0x400000 /* enable counters (in PerfEvtSel0) */
429#define K7CNT_IV 0x800000 /* Invert counter mask comparison result */
430
431#define MSR_K7_EVNTSEL0 0xC0010000
432#define MSR_K7_EVNTSEL1 0xC0010001
433#define MSR_K7_EVNTSEL2 0xC0010002
434#define MSR_K7_EVNTSEL3 0xC0010003
435#define MSR_K7_PERFCTR0 0xC0010004
436#define MSR_K7_PERFCTR1 0xC0010005
437#define MSR_K7_PERFCTR2 0xC0010006
438#define MSR_K7_PERFCTR3 0xC0010007
439
440#endif
441
442#endif
443
444/* end of P5/P6/K7 section*/
445#endif
446
447/* end of not only lib-prototypes section */
448#endif
449
451
452#endif
L4 compiler related defines.
unsigned int l4_uint32_t
Unsigned 32bit value.
Definition l4int.h:40
#define EXTERN_C_BEGIN
Start section with C types and functions.
Definition compiler.h:192
#define EXTERN_C_END
End section with C types and functions.
Definition compiler.h:193
Common L4 ABI Data Types.